• 製品
    • 製品
    • サプライヤー
さらに詳しく検索

Multi-Channels Multi-Modes Base Band Receiver System

モデルナンバー
MCMM RX
サプライヤー
MACTRONIC TECHNOLOGY LTD.
見積の請求

特長

The Multi-Channel, Multi-Mode Receiver (MCMM-RX) system is a four channels wide bandwidth radio receiver using a Innovative Integration X5 210M card in a industrial or compact PCI computer. Custom logic is implemented in the Virtex5 SX95T for the signal processing and data flow controls. Inputs to the system are four analog inputs and sample rate clocks upto 180 MHz into four receive channels. Each channel has independent software defined tuner and baseband demodulation. Demodulation module includes BPSK, QPSK, pi/4 QPSK, and 8PSK. MCMM-RX can be integrated into a PC architecture computer system with data recording capability using RAID array or hard disks. The X5 210M modules provide IF receiver and integrate with the host system PCI Express (PCIe) bus. The host computer configures and controls each module via the PCIe bus as well receives the baseband data streams. The system is easily expanded by adding additional X5 210M modules, up to the limit of the PCIe slots available in the system. The MCMM-RX system software runs on the host PC processor using Windows or Linux. The software provides the operator with channel activity information and allows the operator to tune the channels and select the baseband demodulation type. Remote access to the system, if required, is provided using Ethernet. In addition to remote operation of the system via Ethernet, data can also be retrieved from the system on demand. As shown in the block diagram of the receiver, the IF input is digitized then processed in the FPGA to four channels. The IF input is digitized upto 180 MHz and all channels are running synchronously. Channel activity is detected using power detection with a programmable threshold. If channel activity is detected, the system can be alerted.

最終更新日 : 2017-10-17
LoadingLoading ...


The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)

When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.

ステップ1フォームを入力ステップ2完了

周伊伶 , MACTRONIC TECHNOLOGY LTD.

USD
テンプレートを挿入
0/1500

添付可能なファイルの拡張子: htm, html, doc, docx, pdf, txt, jpg, gif, png. 最大3ファイル(合計10MB)

合計サイズ0

  • +

この機能でご希望のサプライヤーとの正確なマッチングを行いやすくなります。「,」または「enter」で複数のキーワードに分けることができます。

Please fill in all required fields.

    おすすめ

    Loading ...

    少量購入へのおすすめ

    Loading ...